Kingsland Multi profiljernsaks

Five Station: Punching, Shearing, Angle, Section Cropping and Notching Machines.

The machine is supplied with standard equipment and accessories as listed on the next page, suitable for operation on 415v/3Ph/50Hz supply.

The Kingsland Multi range of 60 up to 175 ton machines are in the Kingsland tradition of well engineered, robust steelworkers, built for a long working life.

These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted hold downs at all five work stations.

Free standing on a suitable floor, they just require electrical connection and hydraulic oil to be ready for work.

For two operator utilization, the hydraulic system is activated by two shielded foot controls, one operating the punch and cylinder, the other operating the shear and cylinder. The shear cylinder provides the power to the three shearing and the notch stations.

The system gives accurate power inching at all five work stations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations.

Centralized lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.

An optional ‘Production Pack’ is available to enhance the machine specification, this includes: 1 low volt halogen lamp on a movable magnetic base, 1.0m long touch and cut ruled length stop, fine adjustment facility to the punch stroke and measuring scales in the notch table.

Brosjyre Multi profiljernsaks

Vennligst la dette feltet stå tomt

Nyhetsbrev

Få gode tilbud og spennende nyheter rett i innboksen! Meld deg inn da vel!

Vi spammer ikke, og sender bare ut nyhetsbrev ved gode tilbud eller spesielle anledninger. Se ellers informasjon i personvernerklæringen.

Takk for innmeldingen! Sjekk e-posten din og bekreft innmeldingen.